Great Plains NTA3007HD Operator Manual - Manual (Page 10)

6 NTA907HD or NTA3007HD
166-207M 04/04/2011
MetaData: End of <Safety Topics>
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
on mainframe below fan;
1 total
See “Transport Safety Information” on page 40.
Null4:
Reflectors: Fluorescent Panels
panels: one each tongue draw bar,
panels and triangles: one each corner, rear mainframe;
4 panels and 2 triangles total
See “Transport Safety Information” on page 40.
Null4:
NTA907HD: n/a
(International models use
833-398C panels and
833-399C reflectors)
NTA3007HD: 818-055C
Null4:
29424
NTA907HD: 833-398C NTA3007HD: n/a
(North American models
use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
Reflectors: Red Triangle
NTA907HD: 833-399C NTA3007HD: n/a
(North American models
use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
Null4:
29428