Great Plains NTA3007HD Operator Manual - Manual (Page 146)

142 NTA907HD or NTA3007HD
166-207M 04/04/2011
Row Options
Frame-Mounted Coulters
Frame-mounted coulters are recommended for heavier
no-till conditions and rocky soil. They are independent of
row-unit down-force springs and may be set to different
(usually higher) force levels.
Coulters include tubing and remote zerks for integration
with the standard grease bank plates on the drill.
When ordered with a new drill, frame-mounted coulters
are factory-installed. They may also be ordered for field
installation. Each kit equips an entire drill.
See “Frame-Mounted Coulters (Option)” on page 92
for adjustments.
Coulter Tines
The coulters on your drill can be equipped with optional
trash tines. The tines mount at every other row, and help
guide the residue under the coulters and openers to pre-
vent plugging.
Order one kit per drill.
Null4:
Coulter Kit
For NTA907HD and
NTA3007HD-
-3610 -4875 -6006
with Fluted Blade
43.2cm x 80mm
(17x
5 ⁄
16
in)
249-178A 249-175A 249-172A
with Wavy Blade
43.2cm x 190mm
(17x
3 ⁄
4
in)
249-179A 249-176A 249-173A
with Turbo Blade
43.2cm x 160mm
(17x
5 ⁄
8
in)
249-180A 249-177A 249-174A
Row Spacing
Part
Numbers
3N-30NT 7 1/2IN CLT TINE KIT 249-028A
3N-30NT 10IN CLT TINE KIT 249-029A
Null4:
27067
17in Coulter Blades
Part ordering number includes one blade.
Blade Part Number
17x 5 ⁄
16
in Fluted Blade 820-018C
17x 3 ⁄
4
in Wavy Blade 820-082C
17x 5 ⁄
8
in Turbo Blade 820-156C
Null4:
19679