Bio-Rad Criterion™ TBE-Urea Precast Gels - Manual (Page 12)

6 Technical Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com
4. Press down firmly to break the seals on both sides of
the cassette. The cassette splits open approximately ¹/
3
of the way. Alternatively, open the gel cassette by sliding
the tapered back of the comb into the slits on either
side of the cassette.
5. Pull the two halves of the cassette apart from the top to
completely expose the gel (C).
6. Remove the gel by either floating the gel into a fixing or
staining solution or by carefully lifting the bottom edge
of the gel from the cassette.
C
Criterion Precast Gels