4 sample preparation, 5 running conditions – Bio-Rad Criterion™ TBE-Urea Precast Gels User Manual
Page 30
Advertising
24
Technical Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com
8.4 Sample Preparation
1. Determine the appropriate protein concentration of your sample based on the detection method
and load volume used. (See Chapter 12 for approximate stain sensitivities.)
2. Dilute 1 part sample with 1 part sample buffer. Do not heat the samples.
8.5 Running Conditions
Power conditions
125 V constant
Starting current
90–120 mA/gel
Final current
35–55 mA/gel
Run time
90 min
Criterion Precast Gels
Advertising
This manual is related to the following products: