Connecting the imager to the computer – Bio-Rad Gel Doc™ EZ System User Manual
Page 20
Advertising
Criterion Stain Free
TM
System | Criterion Stain Free System Overview
6
2. When the Image Lab software icon appears on your desktop, double-
click to open the software.
Connecting the Imager to the Computer
1. Install the Image Lab software before connecting the Criterion Stain
Free Imager to a PC computer.
2. Connect the Imager to the PC, using the USB cable provided with the
system.
3. Connect the Criterion Stain Free Imager to AC power, using the
provided power cord.
See diagram below:
4. Turn on power to the Imager using the switch on the side of the
instrument. See the picture below:
USB Cable
Rear of Imager
PC
AC
Power
cord
Power
button
Advertising
This manual is related to the following products: