Bio-Rad Gel Doc™ EZ System - Manual (Page 56)

Criterion Stain Free TM System | Designing Protocols
42
I NCLUDE A NALYSIS T ABLE
This dialog allows you to choose the parts of the analysis table that are
included in your image report.
Under Lanes to Show, you can choose all or just some lanes.
The Lane Profile can be included in your report, or omitted.
Under Columns to Show, you can include the following information. Each type
of information is defined below:
• Band Number - Each band is numbered from top to bottom, within
each lane frame.
• Band Label - You can enter a name for specific samples in the
Analysis Table Band Label column.
• Relative Front - This is the relative distance the protein has
traveled through the gel, measured from the top of the lane frame.
It ranges from 0 on the top through 1 on the bottom of the gel.
• Relative Quantity - This is a measurement of a specific band’s
relative quantity to the total of all identified bands within a given
lane.
• Molecular Weight - This measurement is an absolute value, based
on an interpolation of a given band between known standard
values.
• Band Quantity - This absolute value is the sum of all intensities
within the band boundaries.
Opening and Editing Protocols
Existing Custom protocols can be changed and renamed, using the tools in
Image Lab.
The original default protocol can be edited according to your requirements. It
need not be renamed, but becomes your customized Default protocol.
Open any protocol you have saved in the past by choosing File > Open. To
edit the protocol, you will be presented with the same set of menus and
choices described in the previous section, “Creating and Running Custom
Protocols”.