Bio-Rad Gel Doc™ EZ System - Manual (Page 8)

Criterion Stain Free TM System | Safety and Regulatory Compliance
vi
C AUTIONS
W ARNINGS
CAUTION: With the exception of cleaning or replacing light bulbs,
refer all servicing to qualified Bio-Rad personnel or their agents. If
you experience technical difficulties with the instrument, contact
Bio-Rad to schedule service. The instrument should not be
modified or altered in any way. Alteration voids the manufacturer’s
warranty and may create a potential safety hazard for the user.
CAUTION: If the case interlock is defeated, there is a possibility of
UV-B radiation hazard, due to UV-B light exposure. Caution must
be exercised when servicing the instrument.
CAUTION: Bio-Rad is not responsible for any injury or damage
caused by the use of this instrument for purposes other than that
for which it is intended, or by the modification of this instrument,
when not performed by qualified Bio-Rad personnel or their
agents.
WARNING: This instrument must be connected to an appropriate
AC voltage outlet that is properly grounded.
WARNING: There are hazardous voltages on the inside of the
Criterion Stain Free Imager. Do not remove the system cover when
the instrument is connected to AC power.
WARNING: Do not defeat instrument interlocks; they are designed
to prevent user injury.
WARNING: The Criterion Stain Free Imager contains high voltage
circuits. The user must disconnect the power cord prior to opening
the system cover or removing the lamp modules for bulb
replacement.
WARNING: It is mandatory for users to turn off the Imager and
disconnect AC power from the unit before performing disassembly,
as is needed to replace the lamps.