Mixed size originals, Mixed size originals (scanning, Different size documents simultaneously)" (p.100) – Dell C7765DN MFP Color Laser Printer User Manual

Page 100

Advertising
background image

3 Copy

100

Auto Detect

Detects the document size automatically. The following table shows the document sizes that

can be detected automatically.

Note

If the document size cannot be detected automatically, a screen to enter the document size appears.

The document sizes that can be automatically detected depend on [Paper Size Settings] in the

System Administration mode. For more information, refer to "Paper Size Settings" (P.335).

Standard Size

Select a document size from preset options.

You can change the sizes displayed on the screen. For information on the settings, refer to "Original

Size Defaults" (P.356).

Variable Size

Enter the desired scan size when scanning a non-standard size document or when making

copies at a size different from the original document size. You can specify a value in the range

from 15 to 432 mm for the width (X), and a value in the range from 15 to 297 mm for the

length (Y), in 1 mm increments. To help you specify values, use the scales attached on the

upper and left edges of the document glass.

Note

When the document is loaded in the document feeder, the base point in the Y (length) direction is the

center of the edge. If you specify 100 mm, the scan length will be from 50 mm above to 50 mm below

the center of the document.

Mixed Size Originals (Scanning Different Size Documents Simultaneously)

You can scan documents of various sizes simultaneously and make copies on each size or a

single size of paper. To use this feature, load the documents in the document feeder.

Note

Load documents in landscape orientation. However, always load A5 documents in portrait orientation.
When loading B5 documents together with A3 documents loaded in landscape orientation or A4

documents loaded in portrait orientation, load B5 documents in portrait orientation.

If the top left corners of the documents are not aligned properly, the documents may not be scanned

correctly.

The recommended document size combinations are A4 portrait and A3 landscape, or B5 portrait and

B4 landscape. If another combination of document sizes is used, the documents can be fed at an angle

and may not be copied properly.

1

Select [Mixed Size Originals].

Document Feeder

Document Glass

Auto-detectable

Document Size

B5, B5 , B4, A5, A5 , A4,
A4 , A3, 8.5 x 11",
8.5 x 11" , 11 x 17", 16K ,

8K

B6, B5, B5 , B4, A6, A5, A5 ,
A4, A4 , A3

Advertising