Dell C7765DN MFP Color Laser Printer - Manual (Page 385)

Print Service Settings
385
Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Allow Print Driver to Override
Select the check box to print a banner sheet according to the banner sheet print settings of
the print driver.
Banner Sheet Offset
Set whether or not to offset when banner sheets are output.
Banner Sheet Tray
Select a paper tray used for banner sheets.
This setting applies to Trays 1 to 4 and 6 (optional). You cannot apply this setting to Tray 5.
PostScript Default Color
Set the default value for Post Script output color.
PostScript Paper Supply
Select whether the PostScript Deferred Media Selection feature is enabled or disabled when
the paper tray is selected. Select [Auto Select] to enable the PostScript Deferred Media
Selection feature, or [Select Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note • Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when
[Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.
PostScript Font Absence
Set an action to take when a PostScript font specified in a job is not present.
Cancel Printing
Cancels printing.
Substitute Font and Print
Prints using a substitute font. Courier is used as the substitute font.
PostScript Font Substitution
Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not
present.
XPS Print Ticket Processing
Set how the machine processes the print tickets written in XPS documents.
Note • XPS stands for XML Paper Specification.
Off
Does not process print tickets.
Standard Mode
Uses the standard mode to process print tickets.