Dell C7765DN MFP Color Laser Printer - Manual (Page 149)

Fax Procedure
149
3
If the previous settings still remain, press the
<Clear All> button.
4
Select each tab, and select a feature as
necessary.
When you press the <Power Saver> button while configuring the features, you can select whether to
enable the 2 Sided (Skip Blank Pages) feature.
Step 3 Specifying Destinations
Three methods are available to specify recipients: by phone number, by address number, and
by group dial number. The following shows input methods supported by each method.
* :There two ways in which address numbers and stored programs are assigned to the one touch buttons. Select either of the
following:
* :By default, [Type 1] is selected. For information on how to change the settings registered to the one touch buttons, refer to
"Screen/Button Settings" (P.319).
<Clear All> button
Numeric Keypad One Touch buttons Address Book
Phone Number O X X
Address Number
(Speed Dialing)
4 digits (0001 to 2000)
2 digits (1 to 70) or
(1 to 60)*
From the list tab
and index
3 digits + *
(nnn0 to nnn9)
2 digits + *
(nn00 to nn99)
Group Dial Number # + 2 digits X O
O
X
:
:
Available
Not available
[Type 1] The buttons 1 to 70 are used for address numbers and they correspond to the registered address
numbers 0001 to 0070, while the buttons M01 and M02 are used for stored programs and they
correspond to the registered stored programs 1 and 2.
[Type 2] The buttons 1 to 60 are used for address numbers and they correspond to the registered address
numbers 0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for stored programs and
they correspond to the registered stored programs 1 to 12.