Dell C7765DN MFP Color Laser Printer - Manual (Page 391)

Scan Service Settings
391
Original Size Defaults
Set the document size displayed in [Original Size] in the [Layout Adjustment] screen. You
can assign a document size to each of the 17 buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, assigning the paper sizes to the
buttons will save your time to specify the size each time.
A/B Series Size
You can select from sizes of A and B series such as A4 and B5.
Inch Size
You can select from size of Inch series such as 8.5 x 11" and 11 x 17".
Others
You can select from sizes of other than the above series such as photo and postcard sizes.
Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.
Output Size Defaults
Set the sizes to display in [Output Size] when selecting [Enter Output Size] for scanning
documents at [Reduce/Enlarge] in the [Layout Adjustment] screen.
You can assign any output size to output size buttons. Assigning the output sizes to the
buttons will save your time to specify the size each time.
A/B Series Size
You can select from sizes of A and B series such as A4 and B5.
Inch Size
You can select from size of Inch series such as 8.5 x 11" and 11 x 17".
Others
You can select from sizes of other than the above series such as photo and postcard sizes.
Reduce/Enlarge Presets
Set the magnifications displayed as [Preset %] which are displayed when [Proportional %] is
selected under [Reduce/Enlarge] in the [Layout Adjustment] screen.
You can assign any magnification to the Reduce/Enlarge Preset buttons other than [100%].
Preset %
Select from standard magnification ratios.
Variable %
You can specify a magnification from 25 to 400% in 1% increments.