Dell C7765DN MFP Color Laser Printer User Manual

Page 130

Advertising
background image

3 Copy

130

2

Select any option.

Auto

Copies are collated when the originals are loaded in the document feeder.
Copies are collated when originals are loaded on the document glass and any of the following

features is used: 2 Sided Book Copying, Covers, [Blank Separators & Handouts] or

[Transparency Set & Handouts] of Transparency Options, Booklet Creation, Stapling, Build

Job, Sample Set, and Combine Original Sets.

Collated

The machine outputs sheets sorted into sets that are arranged in page order.

Uncollated

The machine outputs the specified number of copies and sorts sheets by page.

Uncollated with Separators

The machine outputs copies with inserting blank sheets as a separator and sorts sheets by

page.

When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]

Screen" (P.79).

Separator Tray

When you select [Uncollated with Separators], select the paper tray to be used for the

separators.

Note

When you use the bypass tray, select [Bypass] on the [Separator Tray] screen.

Staple

Specify the position for stapling. The number of sheets that can be stapled is 2 - 50 (when

80 gsm paper is used). Available paper types are: Bond, Plain, Recycled, Plain Reload,

Lightweight, Heavyweight, Heavyweight Reload, Extra Heavyweight (170 - 220 gsm), Extra

Heavyweight (170 - 220 gsm) Reload, Gloss, Gloss Reload, Heavyweight Gloss (170 - 220

gsm), Heavyweight Gloss (170 - 220 gsm) Reload, Punched, and Custom Paper 1 to 5.

Note

In the following cases, the actual stapling position differs from the stapling position displayed on the

screen:

- When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position at the right

side.

- When [Original Orientation] is set to [Sideways Images], and [Staple] is set to one position at the left

side.

Hole Punch

Sets the position for punching.

Note

When the punching feature of a finisher is defective, output is delivered to the center tray instead of

the finisher tray. Remove the output delivered to the center tray every now and then.

Advertising