Dell C7765DN MFP Color Laser Printer - Manual (Page 239)

Loading Paper
239
2
Load paper with the side to be copied or
printed on facing down, inserting the paper
until its edge lightly touches against the paper
feed entrance.
Note • Do not load mixed paper types into the tray.
• Do not load paper above the maximum fill line.
It may cause paper jams or machine
malfunction.
• Depending on the type of the heavyweight
paper, paper may not be fed to the machine or
image quality may deteriorate.
3
Adjust the paper guides to align the edges of
the paper loaded.
4
Instruct a copy or print job.
Loading Paper in Tray 6 (HCF B1)
The following describes the procedure for loading paper into Tray 6 (HCF B1).
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing is
automatically resumed when paper is added.
Note • Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together, resulting in
paper jams.
For information on changing the paper size and orientation, refer to "Changing the Paper Size"
(P.241).
1
Pull out Tray 6 until it stops.
Note • While the machine is processing a job, do not
pull out the tray that is being used for the job.
• To prevent paper jams or erroneous detection
of loaded paper in a tray by the machine, do
not add paper on top of any remaining paper in
the tray.
2
Load and align the edge of the paper against
the right edge of the tray with the side to be
copied or printed on facing down.