Specifying snapshot virtual disk names – Dell PowerVault MD3200i User Manual

Page 161

Advertising
background image

Configuration: Premium Feature—Snapshot Virtual Disks

161

12 Click OK.
13 In the Mappings tab, assign mappings between the snapshot virtual disk

and the host that accesses the snapshot virtual disk.

14 To register the snapshot virtual disk with the host operating system, run

the host-based hot_add utility.

15 To associate the mapping between the storage array name and the virtual

disk name, run the host-based SMdevices utility.

Specifying Snapshot Virtual Disk Names

Choose a name that helps you associate the snapshot virtual disk and

snapshot repository virtual disk with its corresponding source virtual disk. The

following information is useful when naming virtual disks:
By default, the snapshot name is shown in the Snapshot virtual disk name

field as:

<source-virtual disk-name>—<sequence-number>

where sequence-number is the chronological number of the snapshot

relative to the source virtual disk.
The default name for the associated snapshot repository virtual disk that is

shown in the Snapshot repository virtual disk field is:

<source-virtual disk-name>—R<sequence-number>

For example, if you are creating the first snapshot virtual disk for a source

virtual disk called Accounting, the default snapshot virtual disk is

Accounting-1, and the associated snapshot repository virtual disk default

name is Accounting-R1. The default name of the next snapshot virtual disk

you create based on Accounting is Accounting-2, with the corresponding

snapshot repository virtual disk named as Accounting-R2 by default.

• Whether you use the software-supplied sequence number that (by

default) populates the Snapshot virtual disk name or the Snapshot

repository virtual disk name field, the next default name for a snapshot or

snapshot repository virtual disk still uses the sequence number determined

by the software. For example, if you give the first snapshot of source virtual

disk Accounting the name Accounting-8, and do not use the software-

supplied sequence number of 1, the default name for the next snapshot of

Accounting is still Accounting-2.

book.book Page 161 Tuesday, June 18, 2013 3:15 PM

Advertising
This manual is related to the following products: