Dell PowerVault MD3200i - Manual (Page 33)

Planning: RAID Controller Modules 33
8 SAS OUT port
link/fault LED
Lights green when all four links are connected.
Lights amber when one to 3 links are disconnected.
Off when all links in the port are disconnected or
cable is disconnected.
9 iSCSI IN port link
LED
Lights green when ethernet connection at 1Gbps
established.
Off when there is no link.
10 Controller power LED Lights green when controller is turned on.
Off when controller is not turned on.
11 iSCSI IN port activity
LED
Lights green when there is no activity on 1Gbps
connection.
Blinks green when there is Activity on 1Gbps
connection.
Off when 1Gbps link is down.
12 Controller fault LED Lights amber when controller fault detected.
Off when controller operating normally.
13 System identification
LED
Blinks blue when system identification switch push-
button on enclosure front panel is pressed.
14 Cache active or cache
offload LED
Lights green when On-board controller memory
contains data.
If AC power fails, this LED changes to indicate Cache
Offload status. If the password reset function has
successfully changed the password, this LED flashes
on and off briefly.
15 Battery fault Lights amber when battery backup unit or battery has
failed.
Off when battery backup unit is operating normally.
16 Password reset switch Activating this switch deletes the password.
17 MAC address label Provides MAC addresses of iSCSI host ports and the
management port.
Item Component Function
book.book Page 33 Tuesday, June 18, 2013 3:15 PM