Installing the control panel – Dell PowerVault MD3200i User Manual
Page 232
Advertising
230
Management: Installing Array Components
Figure 16-14. Removing and Installing the Control Panel-PowerVault MD3220i
Installing the Control Panel
1 Align the control panel with the slot on the array.
2 Slide the control panel into the array until:
–
The release tab clicks into place in PowerVault MD3200i.
–
The release pin clicks into place in PowerVault MD3220i.
3 Replace the hard drives in their respective slots. See "Installing a Hard
4 Connect all the power cables to the array.
5 Turn on the array and the host server.
1
release pin
2
control panel
1
2
book.book Page 230 Tuesday, June 18, 2013 3:15 PM
Advertising
This manual is related to the following products: