Dell PowerVault MD3200i - Manual (Page 94)

94 Configuration: Event Monitor
Windows
To enable or disable the event monitor:
1 Click Start Administrative Tools Services.
or
Click
Start Settings Control Panel Administrative Tools
Services.
2 From the list of services, select Modular Disk Storage Manager Event
Monitor.
3 Select Action Properties.
4 To enable the event monitor, in the Service Status area, click Start.
5 To disable the event monitor, in the Service Status area, click Stop.
Linux
To enable the event monitor, at the command prompt, type SMmonitor
start
and press <Enter>. When the program startup begins, the system
displays the following message:
SMmonitor started.
To disable the event monitor, start terminal emulation application (console
ox xterm) and at the command prompt, type SMmonitor stop and press
<Enter>. When the program shutdown is complete, the following message
is displayed:
Stopping Monitor process.
book.book Page 94 Tuesday, June 18, 2013 3:15 PM