Virtual disk recovery, Using snapshot and disk copy together, Multi-path software – Dell PowerVault MD3200i User Manual

Page 54

Advertising
background image

54

Planning: MD3200i Series Storage Array Terms and Concepts

Virtual Disk Recovery

You can use the Edit host server-to-virtual disk mappings feature to recover

data from the backup virtual disk. This functionality enables you to unmap

the original source virtual disk from its host server, then map the backup

virtual disk to the same host server.
Ensure that you record the LUN used to provide access to the source virtual

disk. You need this information when you define a host server-to-virtual disk

mapping for the target (backup) virtual disk. Also, be sure to stop all I/O

activity to the source virtual disk before beginning the virtual disk recovery

procedure.

Using Snapshot and Disk Copy Together

You can use the Snapshot Virtual Disk and Virtual Disk Copy premium

features together to back up data on the same storage array, or to restore the

data on the snapshot virtual disk to its original source virtual disk.
You can copy data from a virtual disk by:

• Taking a point-in-time snapshot of the data (online)
• Copying the data to another virtual disk using a virtual disk copy (offline)

You can select a snapshot virtual disk as the source virtual disk for a virtual

disk copy. This configuration is one of the best ways you can apply the

snapshot virtual disk feature, since it enables complete backups without any

impact on the storage array I/O.
You cannot use a snapshot repository virtual disk as a source virtual disk or as

a target virtual disk in a virtual disk copy. If you select the source virtual disk

as the target virtual disk of a virtual disk copy, you must disable all snapshot

virtual disks associated with the source virtual disk.

Multi-Path Software

Multi-path software (also referred to as the failover driver) is a software

resident on the host server that provides management of the redundant data

path between the host server and the storage array. For the multi-path

software to correctly manage a redundant path, the configuration must have

redundant iSCSI connections and cabling.

book.book Page 54 Tuesday, June 18, 2013 3:15 PM

Advertising
This manual is related to the following products: