Naming or renaming storage arrays – Dell PowerVault MD3200i User Manual

Page 70

Advertising
background image

70

Configuration: About Your Storage Array

• In the AMW, select Storage ArrayBlinkStorage Array.
The LEDs blink on the physical disks in the storage array.

2 After locating the storage array, click OK.

The LEDs stop blinking.

3 If the LEDs do not stop blinking, select Storage ArrayBlink Stop All

Indications.
A confirmation message is displayed.

4 Click OK.

Naming or Renaming Storage Arrays

Each storage array must be assigned a unique up to 30-character

alphanumeric name. A name can consist of letters, numbers, and the special

characters underscore (_), dash (–), and pound sign (#). No other special

characters are allowed.
To rename a selected storage array:

1 Perform one of these actions:

• In the AMW

Setup tab, select Rename Storage Array.

• In the EMW

Devices tab Tree view, select Edit Rename.

• In the EMW

Devices tab Table view, select EditRename.

• In the EMW

Devices tab Tree view, right-click on the desired array

icon and select

Rename.

The

Name/Rename Storage Arrays dialog is displayed.

2 Select the relevant storage array from the Select storage array table.

If you do not know the name or physical location of the storage array, click

Blink. After locating the storage array, click OK to turn off the LEDs.
The name of the storage array is displayed in the

Storage array name.

3 In Storage array name, type the new name of the storage array. If

applicable, add a comment for the storage array in

Additional comment.

4 Click Apply.

A message is displayed warning you about the implications of changing the

storage array name.

book.book Page 70 Tuesday, June 18, 2013 3:15 PM

Advertising
This manual is related to the following products: