Dell PowerVault MD3200i - Manual (Page 263)

Troubleshooting: Your Storage Array Software 261
or
Click
Start Administrative Tools Services.
2 In the Services dialog, select Modular Disk Storage Manager Agent.
3 If the modular disk storage manager agent is running, click Action Stop
and wait approximately 5 seconds.
4 Click Action Start.
Linux
To start or restart the host context agent software in Linux, enter the
following command at the prompt:
SMagent start
The SMagent software may take a little time to initialize. The cursor is
shown, but the terminal window does not respond. When the program starts,
the following message is displayed:
SMagent started.
After the program completes the startup process, text similar to the following
messages is displayed:
Modular Disk Storage Manager Agent, Version 90.02.A6.14
Built Wed Feb 03 06:17:50 CST 2010
Copyright (C) 2009-2010 Dell, Inc. All rights reserved.
Checking device <n/a> (/dev/sg10): Activating
Checking device /dev/sdb (/dev/sg11): Skipping
Checking device <n/a> (/dev/sg3): Activating
Checking device <n/a> (/dev/sg4): Activating
Checking device <n/a> (/dev/sg5): Activating
Checking device <n/a> (/dev/sg6): Activating
Checking device <n/a> (/dev/sg7): Activating
Checking device <n/a> (/dev/sg8): Activating
Checking device <n/a> (/dev/sg9): Activating
book.book Page 261 Tuesday, June 18, 2013 3:15 PM