Protecting against a failed snapshot rollback, Previous versions of the md storage manager, Starting a snapshot rollback – Dell PowerVault MD3200i User Manual

Page 169: Protecting against a failed, Snapshot rollback, Previous versions of the, Md storage manager

Advertising
background image

Configuration: Premium Feature—Snapshot Virtual Disks

169

If an error occurs during the rollback, the operation is paused and the base

virtual disk and snapshot virtual disk displays Needs Attention icons. The

RAID controller module also logs the event to the Major Event Log (MEL).

Follow the Recovery Guru procedure to correct the error and repeat the

rollback operation.

WARNING:

Risk of data loss: If you cancel a snapshot rollback in progress, the

base virtual disk may remain in an unusable state and the snapshot virtual disk is
displayed as failed in the MD storage management software. Therefore, do not
cancel a snapshot rollback unless reliable recovery options exist for restoring the
content of the base virtual disk.

Command Line Options

Optionally, you also can use the command line interface (CLI) to start,

cancel, resume or modify priority of a snapshot rollback. For more

information, see the CLI Guide.

Protecting Against a Failed Snapshot Rollback

To protect your base virtual disk data, it is recommended that you create a

new snapshot virtual disk from the base virtual disk before beginning a

rollback operation. If the snapshot rollback fails, use this new snapshot virtual

disk to restore your base virtual disk.

Previous Versions of the MD Storage Manager

Snapshot virtual disks created using previous versions of MD Storage

Manager that did not support snapshot rollback do not have to be recreated

or changed to be used in a subsequent rollback operation. Once the latest

versions of the MD storage management software and RAID controller

module firmware are installed, snapshot virtual disks created under previous

versions support the snapshot rollback feature. However, if you revert to an

older version of the MD storage management software after you have

performed a snapshot rollback, the older MD storage management software

does not support the snapshot virtual disk.

Starting a Snapshot Rollback

To start a snapshot rollback:

1 In the array management window, select the Logical tab.

book.book Page 169 Tuesday, June 18, 2013 3:15 PM

Advertising
This manual is related to the following products: