Dell PowerVault DL2000 - Manual (Page 21)

Table 2-2 Command line switches for the Storage Provisioning Option
Description Switch Operation Function
Outputs the properties for
a specified physical disk on
a storage array. Returns a
1 if the command succeeds
or a -1 if the command
fails. -o531 View physical disk
properties
Specifies the ID or the
name of the storage array.
You should separate the
multiple IDs or multiple
names with a comma. -si:storage
array IDs
or
-sn:storage
array names
Specifies the ID or the
name of the storage array.
You should separate the
multiple IDs or multiple
names with a comma. -pi:physical
disk IDs
or
-pn:physical
disk names
Specifies the enclosure
that the physical disk is in
and the slot that the
physical disk occupies.
Enter the name of the
enclosure and slot in the
enclosure1\slot1 format.
You should separate the
multiple names with a
comma. -pl:physical
enclosure\slot
list
Returns a 1 if the disk is
configured as a hot spare
or a 0 if the disk is not
configured as a hot spare. -hot:hot spare
Returns a 1 if the disk is
configured for use with
Backup Exec or a 0 if the
disk is not configured. -cf:configured
21 Installing and configuring Backup Exec by using the Storage Provisioning Option
About using the Backup Exec Command Line Applet with the Storage Provisioning Option