Dell PowerVault DL2000 - Manual (Page 41)

Type the low disk space threshold at
which you want Backup Exec to send the
second of three alerts. The default is 85%,
which is a percentage of the total available
disk space on this virtual disk. You can
change the default, and you can change
the amount of space from a percentage to
megabytes or gigabytes. Threshold 2
Type the low disk space threshold at
which you want Backup Exec to send the
last of three alerts. The default is 95%,
which is a percentage of the total available
disk space on this virtual disk. You can
change the default, and you can change
the amount of space from a percentage to
megabytes or gigabytes. Threshold 3
4 Click OK.
Setting default options for an individual virtual disk
on a storage array
You can set the default options that apply to individual virtual disks.
To set defaults options for an individual virtual disk on a storage array
1 On the navigation bar, click Devices.
2 Expand Storage Arrays, and then select the virtual disk that you want to view.
3 In the task pane, under General Tasks, click Properties.
4 On the Advanced tab, change the following information as appropriate:
Type the first low disk space threshold at
which you want Backup Exec to send an
alert. You can change the value of the
threshold, and you can change the amount
of disk space to megabytes or gigabytes.
When the amount of used disk space
reaches this threshold, Backup Exec sends
an alert. The default is 75%, which is a
percentage of the total available disk
space on this virtual disk.
First threshold
41 Setting default configuration options for virtual disks
Setting default options for an individual virtual disk on a storage array