Dell PowerVault DL2000 - Manual (Page 53)

To configure an unconfigured virtual disk for use with Backup Exec
1 On the navigation bar, click Devices.
2 Expand Storage Arrays, and then select the unconfigured virtual disk.
3 In the task pane, under Media Tasks, click Configure.
4 When you are prompted, click OK.
Backup Exec submits a Configure Virtual Disk job to configure the virtual
disk as a destination device for jobs.
See “Setting default options for an individual virtual disk on a storage array”
on page 41.
53 Expanding storage capabilities of the Dell™ PowerVault™ DL Backup to Disk Appliance by using the Storage Provisioning
Option
About manually creating a virtual disk