Dell PowerVault DL2000 - Manual (Page 28)

Lists the expected amount of total raw
capacity of all the physical disks in the
storage array.
If a storage array can read the total capacity,
then it appears in this field. Otherwise,
Backup Exec estimates the total capacity.
Total capacity
The amount of raw capacity of all of the
physical disks in the storage array that have
been used. Backup Exec calculates used
capacity by subtracting available capacity
from total capacity. Used capacity
The amount of expected total raw capacity
of all of the configured physical disks in the
storage array. Configured capacity
The expected amount of total raw capacity
of all of the unconfigured physical disks in
the storage array. Unconfigured capacity
The name that the Dell™ OpenManage™
Server Administrator assigns to the storage
array hardware. Hardware name
Values for hardware status are as follows:
■ OK.
Note: The storage array is online.
■ Offline.
The storage array and the virtual disks
on the storage array are offline. Backup
Exec cannot access them.
For more information, see your Dell
documentation.
Hardware status
Viewing general properties, components, and virtual disks in Backup Exec
About viewing storage array components in Backup Exec 28