Dell PowerVault DL2000 - Manual (Page 33)

See “Setting default options for an individual virtual disk on a storage array”
on page 41.
Viewing properties of unconfigured virtual disks on a storage array
You can view the properties of an unconfigured virtual disk on a storage array.
To view properties of unconfigured virtual disks on a storage array
1 On the navigation bar, click Devices.
2 Expand Storage Arrays, and then select an unconfigured virtual disk.
3 In the task pane, under General Tasks, click Properties.
4 On the Virtual Disk (Unconfigured) Properties dialog box, view the following
information:
5
Displays the name of the unconfigured
virtual disk. You can edit this field to
rename the device. Names cannot exceed
128 characters.
The default name is VIRTDISK x, where x
is a number that increments each time
that you create a virtual disk.
Name
The name that the Dell™ OpenManage™
Server Administrator assigns to the
virtual disk. Hardware name
Values for the hardware status are as
follows:
■ OK
The unconfigured virtual disk is
online.
■ Offline
The unconfigured virtual disk is
offline.
■ Failed
The unconfigured virtual disk has
failed.
Hardware status
33 Viewing general properties, components, and virtual disks in Backup Exec
About viewing storage array components in Backup Exec