Dell PowerVault DL2000 - Manual (Page 23)

Table 2-2 Command line switches for the Storage Provisioning Option
(continued)
Description Switch Operation Function
Required.
Specifies the ID or the
name of the virtual disk on
the storage array.
-vi:virtual
disk ID
or
-vn:virtual
disk name
Waits for the present
operation to finish. -w
Renames a virtual disk or
a storage array. Returns a
1 if the command succeeds
or a -1 if the command
fails. You must specify
either a storage array or a
virtual disk to rename; you
cannot specify both. -o535 Rename a virtual
disk or a storage
array
Required.
Specifies the ID or the
name of the storage array.
-si:storage
array ID
or
-sn:storage
array name
Required.
Specifies the ID or the
name of the virtual disk on
the storage array.
-vi:virtual
disk ID
or
-vn:virtual
disk name
Required.
Provides the new name for
the device.
-nn:new name
Runs a scan operation to
find new storage arrays,
virtual disks, or physical
disks. No switch required. -o536 Detect a new
storage array
23 Installing and configuring Backup Exec by using the Storage Provisioning Option
About using the Backup Exec Command Line Applet with the Storage Provisioning Option