Dell PowerVault DL2000 - Manual (Page 29)

Values for hardware health are as follows:
■ OK.
The storage array is online.
■ Warning.
The storage array may fail or produce
errors, but it is currently operational. The
storage array and the virtual disks on the
storage array are offline. Backup Exec
cannot access them.
■ Critical.
The storage array has failed. The storage
array and the virtual disks on the storage
array are offline. Backup Exec cannot
access them.
For more information, see your Dell
documentation.
Hardware health
Information that Dell provides to assist you
with identification of the attached storage
array hardware. See your Dell
documentation. Identification
Changing or viewing general properties of virtual disks on storage
arrays
You can change or view general properties for a virtual disk on a storage array.
To change or view general properties of virtual disks on storage arrays
1 On the navigation bar, click Devices.
2 Expand Storage Arrays, and then select the virtual disk that you want to view.
3 In the task pane, under General Tasks, click Properties.
4 On the General tab, view or set the following defaults as appropriate:
29 Viewing general properties, components, and virtual disks in Backup Exec
About viewing storage array components in Backup Exec