Dell PowerVault DL2000 - Manual (Page 34)

Values for the hardware health are as
follows:
■ OK
The unconfigured virtual disk is
online.
■ Warning
The unconfigured virtual disk may fail
or produce errors, but it is currently
operational.
■ Critical
The unconfigured virtual disk has
failed.
■ Unspecified
The unconfigured virtual disk is in the
process of configuration.
Hardware health
The type of disk group that the
unconfigured virtual disk is on.
Disk classifications are as follows:
■ Stripe with parity (RAID 5)
■ Simple (RAID 0)
Backup Exec creates only physical disk
groups with a disk classification of Stripe
with parity (RAID 5). If another disk
classification appears, the disk group was
created with a tool other than the Storage
Provisioning Option.
Disk classification
See “About manually creating a virtual disk” on page 52.
See “Configuring an unconfigured virtual disk for use with Backup Exec” on page 52.
Viewing properties of physical disks on a storage array
You can view properties for the physical disks in a storage array.
To view properties of physical disks on a storage array
1 On the navigation bar, click Devices.
2 Expand Storage Arrays, and then select the storage array that you want to
view.
3 In the task pane, under General Tasks, click Properties.
4 On the Physical Disks tab, view the following information:
Viewing general properties, components, and virtual disks in Backup Exec
About viewing storage array components in Backup Exec 34