Dell PowerVault DL2000 - Manual (Page 36)

Values for hardware status are as follows:
■ OK
The physical disk is online.
■ Offline
The physical disk is offline. The virtual
disks that use this physical disk may
also be offline. Backup Exec cannot
access them.
■ Failed
The physical disk has failed. The
virtual disks that use this physical disk
may also fail. Backup Exec cannot
access the virtual disks.
If hot spares are configured, the virtual
disk is automatically rebuilt. If your
storage array does not support an
automatic rebuild capability, you must
use vendor tools to perform a manual
rebuild of the virtual disks. Refer to
your Dell documentation for more
information.
To troubleshoot issues, refer to the Dell
documentation and management software
that are supplied with DL Appliance.
Status
Values for hardware health are as follows:
■ OK
The physical disk is online.
■ Warning
The physical disk may fail or produce
errors, but it is currently operational.
■ Critical
The physical disk may fail. You should
replace the physical disk.
To troubleshoot issues, refer to the Dell
documentation and management software
that are supplied with DL Appliance.
Health
Renaming a virtual disk or storage array
You can rename a virtual disk or storage array. You cannot change the hardware
name.
Viewing general properties, components, and virtual disks in Backup Exec
About viewing storage array components in Backup Exec 36