Dell PowerEdge R300 - Manual (Page 55)

Using the System Setup Program
55
System Security Screen
Table 2-8 lists the options and descriptions for the information fields that
appear on the System Security screen.
NOTE:
Systems shipping in China are not equipped with TPM. Disregard any TPM
options listed in the System Security Screen.
Failsafe Baud Rate
(115200 default) Displays the failsafe baud rate used for console
redirection when the baud rate cannot be negotiated
automatically with the remote terminal. This rate
should not be adjusted.
Remote Terminal Type
(VT 100/VT 220 default) Select either VT 100/VT 220 or ANSI.
Redirection After Boot
(Enabled default) Enables or disables BIOS console redirection after your
system boots to the operating system.
Table 2-8. System Security Screen Options
Option Description
System Password Displays the current status of your system's password
security feature and allows you to assign and verify a new
system password.
NOTE:
See "Using the System Password" on page 59 for
instructions on assigning a system password and using or
changing an existing system password.
Setup Password Restricts access to the System Setup program in the same
way that you restrict access to your system using the
system password feature.
NOTE:
See "Using the Setup Password" on page 61 for
instructions on assigning a setup password and using or
changing an existing setup password.
Table 2-7. Serial Communication Screen Options (continued)
Option Description
book.book Page 55 Sunday, June 21, 2009 5:16 PM