Dell PowerEdge R300 User Manual
Page 77
Advertising
Installing System Components
77
Figure 3-6.
Installing a Hot-Plug Hard Drive
3 Install the hot-plug hard drive.
a
Open the handle on the hard-drive carrier.
b
Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c
Close the handle to lock the drive in place.
4 Replace the front bezel, if it was removed in step 1. See "Front Bezel" on
1
hard drive
2
drive carrier
3
drive carrier release handle
1
2
3
book.book Page 77 Sunday, June 21, 2009 5:16 PM
Advertising