Dell PowerEdge R300 User Manual
Page 88
Advertising
88
Installing System Components
Figure 3-11.
Installing and Removing the Power Supply Fan Assembly
NOTE:
In the preceding figure, the 12C cable is shown connecting over the control
panel cabling. This cable should be routed under the control panel cable and the
internal USB key connector. The 12C cable seats in a cable guide clip that is directly
beneath the control panel connector.
1
power supply fan assembly
2
fan cables and connector
3
FAN_MOD connector on
power distribution board
1
2
3
book.book Page 88 Sunday, June 21, 2009 5:16 PM
Advertising