Dell PowerVault DR2000v - Manual (Page 107)

For command-specific help, please type diagnostics --help <command>
eg:
diagnostics --help show
Maintenance
The DR Series system CLI maintenance commands lets you display the system maintenance repair progress, and
manage the data repair and state of a DR Series system. Maintenance tasks let you perform basic repairs and maintain
the data and the DR Series system.
NOTE: Whenever the DR Series system enters or exits from the Maintenance mode state, all communication via
CIFS, NFS, OST, or RDS is lost.
The set of maintenance commands and options should only be used when the DR Series system is in the Maintenance
mode state. Dell recommends that you contact Dell Support before performing any of these DR Series system CLI
commands.
The --filesystem commands perform maintenance operations on the DR Series system file system, the --configuration
commands perform a backup and restore of the system configuration, the --hardware commands manage the appliance
hardware, the --disk commands manage the system disk drives, and the --vdisk commands manage the virtual disk
drives.
NOTE: This set of maintenance commands provide some functionality that is not available in the DR Series system
GUI. To check the status of the DR Series system, use the DR Series system CLI system --show command to
display the current status.
Maintenance Command Usage
This topic introduces the maintenance command usage:
NOTE: Using some of the maintenance command options could result in the deletion of data. Carefully observe the
warnings (for example, running the scan without running the repair). If you have questions, do not perform these
DR Series system CLI command options without first contacting Dell Support.
• maintenance --filesystem [options]
• maintenance --configuration [options]
• maintenance --hardware [options]
• maintenance --disk [options] (Option only available on a Physical DR)
• maintenance --remote_access [options] (Option only available on a Physical DR)
• maintenance --vdisk --check_consistency --type [options] (Option only available on a Physical DR)
• maintenance --help
NOTE: If you specify a command without supplying the expected value or option, you are prompted to provide the
correct value or option.
maintenance --filesystem [--scan_status]
Description
Displays the current filesystem checker status and scan progress for a DR Series system.
Syntax
maintenance --filesystem --scan_status
107