Dell PowerVault DR2000v - Manual (Page 43)

Result
WARNING: This will reset network configuration to factory settings and
will require a system reboot. Existing configuration will be lost.
Do you want to continue (yes/no) [n]?yes
Reboot the system using the command 'system --reboot' to complete the network
factory reset.
network --host
Description
The command manages local hosts.
Syntax
network --host [--add] [--ip <IPv4/IPv6 address>] [--name <host name>]
[--delete] [--ip <IPv4/IPv6 address>] [--name <host name>]
--add Add local host.
--delete Delete local host.
--ip Host IP address to manage.
--name Host name (FQDN or alias) to manage.
network --route
Description
The command helps to manage local routes.
Syntax
network --route [--add] [--network <destination networks>] [--netmask
<netmask>] [--gateway <gateway addresses>] [--interface <bondN|ethN|lo>]
[--delete] [--network <destination networks>] [--netmask <netmask>] [--gateway
<gateway addresses>] [--interface <bondN|ethN|lo>]
--add Add local route.
--delete Delete local route.
--network Destination network.
--netmask Destination network mask.
--gateway Gateway to destination network.
--interface Interface to route through.
Result
network --nslookup --destination <ip address | hostname>
Description
Performs a domain name system (DNS) lookup for a DR Series system.
Syntax
network --nslookup --destination 10.25.20.15
Result
10.25.20.15 has name sys-59.storage.local.
43