Dell PowerVault DR2000v - Manual (Page 92)

system --storage [--set_usage_alert <70% - 90%>]
Description
Used to specify at what storage utilization percentage an alert should be sent.
Syntax
system --storage --set_usage_alert 90
Result
System storage usage alert has been set at 90%.
system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--
disk <slot num>]
Description
Turns on an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --
storage command) in the DR Series system. Select from the following DR Series system CLI command options:
• --blink: turns on LED on the physical disk or expansion shelf to identify it.
• --type <internal | external>: identifies storage as an internal physical disk or external expansion shelf.
• --service_tag <service tag>: identifies physical disk or expansion shelf by its unique service tag.
• --disk <slot num>: identifies the disk slot number (if no disk slot is defined, it globally affects all disks).
NOTE: There is a counterpart to this command, in which you can turn off the LED that aids in locating the physical
disk or expansion shelf. For more information, see
system --storage [--unblink] [--type <internal | external>] [--
service_tag>] [--disk <slot num>] .
NOTE: The above options are only available on a Physical DR.
Syntax
system --storage --blink --type external --service_tag HCM0PT3
Result
Turned on blinking for all disks in enclosure "HCM0PT3".
system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--
disk <slot num>
Description
Turns off an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --
storage command) in the DR Series system. Select from the following DR Series system CLI command options:
• --unblink: turns off LED on the physical disk or expansion shelf.
• --type <internal | external>: identifies storage as an internal physical disk or external expansion shelf.
• --service_tag <service tag>: identifies physical disk or expansion shelf by its unique service tag.
• --disk <slot num>: identifies the disk slot number (if no disk slot is defined, it globally affects all disks).
NOTE: The above options are only available on a Physical DR.
Syntax
system --storage --unblink --type external --service_tag CTKHVW3
92