Dell PowerVault DR2000v - Manual (Page 131)

Replication Target IP : 10.250.233.188
Replication Target Mgmt Name : 10.250.233.188
Replication Target Mgmt IP : 10.250.233.188
Replication Local Data Name : DR4100-Test
Replication Local Data IP : 10.250.240.192
Replication Target Container : backup
Replication Enabled : Yes
Replication Compression Enabled: Yes
Replication Encryption : AES 128-bit:
NOTE: To verify that you have successful added a replication link to the DR Series system (or to view the current
status of existing containers), see
replication --show .
replication --update --name <name> --role <source | target> [--peer <ip address |
hostname>] [--encryption <none | aes128 | aes256>] [--username <user name>]
Description
Updates an existing replication link to a container in a DR Series system and allows you to change the corresponding
role, peer IP address or host name, the encryption being used, and user name based on the DR Series system CLI
command options you specify.
Syntax
replication --update --name backup --role source --peer 10.25.19.5
Result
NOTE: If you attempt to update a container that already has replication enabled, this displays the following
message:
Replication on backup is enabled and cannot be updated, please stop it first.
When replication is enabled on the container, you must first disable it before you can update it. To disable replication on
a container, enter the DR Series system CLI replication --stop command and define the container name and role:
replication --stop --name <name> --role <source | target>
NOTE: For more information about disabling replication, see replication --stop --name <name> --role <source |
target> .
Disables replication on a container:
replication --stop --name backup --role source
Replication configuration updated successfully.
Replication Container : backup
Replication Role : Source
Replication Target System : acme-85
Replication Target System IP : 10.25.192.5
Replication Target Container : acme85-S2
Replication Enabled : No
Replication Compression Enabled : Yes
Replication Encryption : AES 128-bit
replication --delete --name <name> --role <source | target> [--force]
Description
Deletes an existing replication link to a container in a DR Series system.
131