Dell PowerVault DR2000v - Manual (Page 129)

Result
Replication Container ID : 1
Replication Container : backup
Replication Entry ID : 1
Replication Role : Target
Replication MDS Port : 9915
Replication Data Port : 9916
Replication Source : DR2K-01
Replication Source IP : 10.250.208.232
Replication Source Mgmt Name : DR2K-01
Replication Source Mgmt IP : 10.250.208.232
Replication Local Data Name : DR4100-Test
Replication Local Data IP : 10.250.240.192
Replication Source Container ID : 1
Replication Source Container : backup
Replication Enabled : Yes
Replication Compression Enabled : Yes
Replication Encryption : AES 128-bit
NOTE: To see how to display the limits set for the replication containers, see replication --limit --speed
<<num><kbps | mbps | gbps> | default> --target <ip address | hostname> .
replication --show
Description
Displays the current status of all existing replication containers (and respective roles) in the DR Series system.
Syntax
replication --show
Result
Container Name Replication Role Status
backup Source, Target Enabled
acme-59 Source Enabled
acmeStorage1 Source Enabled
acmeStorage2 Source Enabled
acmeStorage3 Target Enabled
replication --show [--limits]
Description
Displays the limits set for your replication containers on the DR Series system.
Syntax
replication --show --limits
Result
Replication limits are enabled.
Host Name Target IP Speed Limit
acme-85 10.21.22.20 192 KBps
NOTE: You can limit the bandwidth consumed by the replication process by setting a value in kilobytes/second
(kbps), megabytes/second (mbps), gigabytes/second (gbps), or use an unlimited bandwidth (default). The minimum
allowed bandwidth setting for a DR Series system is 192 kbps.
129