Dell PowerVault DR2000v - Manual (Page 93)

Result
Turned off blinking for all disks in enclosure "CTKHVW3".
system --mgmt_traffic
Description
The command configures Webserver or Telnet to use a specific network interface.
Syntax
system --mgmt_traffic [--add] [--type <Webserver|Telnet>] [--interface <bondN|
ethN|lo>]
[--update] [--type <Webserver|Telnet>] [--interface <bondN|
ethN|lo>]
[--delete] [--type <Webserver|Telnet>]
--add Add access network configuration.
--update Update access network configuration.
--delete Delete access network configuration.
--type Access type <Webserver|Telnet> to configure.
--interface Interface to use for access [bond(0-N)|eth(0-N)].
Result
Successfully added application webserver.
Restarting webserver service ... done.
system --backup_traffic
Description
The command specifies the network interfaces to use for backup network traffic.
Syntax
system --backup_traffic [--add] [--type @NFS|CIFS|OST|RDS#] [--interface
@bond(0-N)|eth(0-N)|lo#]
[--update] [--type @NFS|CIFS|OST|RDS#] [--interface @bond(0-N)|
eth(0-N)|lo#]
[--delete] [--type @NFS|CIFS|OST|RDS#]
--add Add backup network configuration.
--update Update backup traffic network configuration.
--delete Delete backup traffic network configuration.
--type Backup traffic type [NFS|CIFS|OST|RDS] to configure.
--interface Interface to use for backup traffic.
Result
WARNING: This operation requires filesystem server restart. IO to the box will
be stopped.
Do you want to continue (yes/no) [n]? y
Successfully added application.
Restarting file system ... done.
93