Dell PowerVault DR2000v - Manual (Page 112)

Result
Configuration saved successfully.
maintenance --configuration [--restore]
Description
Restores a previously backed up DR Series system configuration and overwrites the current configuration on the
system.
Syntax
maintenance --configuration --restore
Result
WARNING: Restore will overwrite existing configuration from the previous backup.
Previous backup was taken at time: "Tue Sep 26 16:35:03 2012".
All configuration changes after previous backup will be lost.
Do you want to continue (yes/no) [n]? y
Configuration is restored successfully.
maintenance --configuration [--reinit_dictionary]
Description
Reinitializes the dictionary on a DR Series system. Using the --reinit_dictionary command is not considered a commonly
performed function. Because the dictionary acts as an index that maps each chunk of data to a specific location, it is
referenced during data ingests to determine if the DR Series system has seen this data before. When you reinitialize the
dictionary, all entries that indicate whether there were previously archived data locations are removed. As a result,
during new data ingests the DR Series system will be unable to detect any duplicates based on the existing archived
data.
NOTE: Use caution when considering whether you should reinitialize the dictionary. This type operation is only
performed rarely, and when performed, only under special circumstances. Contact and consult with Dell Support
before you use this command.
Syntax
You will need to type yes to continue or no to return to the system prompt when you are prompted whether you want to
continue with this process.
maintenance --configuration --reinit_dictionary
Please enter administrator password:
WARNING: ALL DICTIONARY DATA WILL BE ERASED!
Do you want to continue (yes/no)?
stop Filesystem... Done.
Initializing Dictionary... Done.
Restart Filesystem... Done.
112