Dell PowerVault DR2000v - Manual (Page 94)

system --replication_traffic
Description
The command sets the default network interface for replicating 'source' data.
Syntax
system --replication_traffic [--add] [--interface <bondN|ethN|lo>]
[--update] [--interface <bondN|ethN|lo>]
[--delete]
--add Add default replication network configuration.
--update Update default replication network configuration.
--delete Delete default replication network configuration.
--interface Interface to use for replicating 'source' data.
For example, to add the replication, run the command, system --replication_traffic --add --
interface bond0
Result
Successfully added application replication.
system --opdup_traffic
Description
The command sets the default network interfaces for optimized copy data transfer.
Syntax
system --opdup_traffic [--add] [--incoming_interface <bondN|ethN|lo>] [--
outgoing_interface <bondN|ethN|lo>]
[--update] [--incoming_interface <bondN|ethN|lo>] [--
outgoing_interface <bondN|ethN|lo>]
[--delete]
--add Add default optimized copy configuration.
--update Update default optimized copy configuration.
--delete Delete default optimized copy configuration.
--incoming_interface Interface to use for receiving optimized copy
data.
--outgoing_interface Interface to use for sending optimized copy data.
For example, to add the default network interface for incoming traffic, run the command: system --
opdup_traffic --add --incoming_interface bond0
Result
Successfully added application opdup_incoming.
system --help
Description
Displays the list of all system-related options that can be used as a reference when using the DR Series system CLI.
Syntax
system --help
94