Maintenance --hardware [--reinit_nvram, Maintenance --hardware [--restore_hw_db – Dell PowerVault DR2000v User Manual

Page 113

Advertising
background image

maintenance --configuration [--reset_web_certificate]

Description

The current release supports installation of an SSL certificate. This command can be used to restore the default SSL
certificate that ships with the DR.

Syntax

maintenance --configuration --reset_web_certificate

Result

Successfully restored the default certificate.

maintenance --hardware [--reinit_nvram]

Non-volatile RAM (NVRAM) is the type of memory that retains its contents even when power to it is turned off. This is an
important component of the DR Series system that is crucial to normal data operations

Description

Initializes the NVRAM that resides on the Dell DR Series system hardware appliance on which the DR Series system
software is installed.

CAUTION: Carefully consider before attempting to use the DR Series system CLI --reinit_nvram command. This
command should only be used under the direction of Dell Support because it permanently erases all data stored
on the NVRAM in the Dell DR Series system hardware appliance. This command is only to be used when replacing
the NVRAM in your hardware appliance. Contact Dell Support and seek assistance before you use this command.

Syntax

maintenance --hardware --reinit_nvram

Result

Please enter administrator password:

WARNING: ALL NVRAM DATA WILL BE ERASED!

Do you want to continue (yes/no)?

Type yes to continue or no to return to the system prompt.

maintenance --hardware [--restore_hw_db]

Description

Restores and repairs the Hardware Health Monitor database for a DR Series system.

Syntax

maintenance --hardware --restore_hw_db

Result

WARNING: All previous Event & Alert information will be deleted.

Do you want to continue? (yes/no) [n]? y

Please enter the administrator password:

The Hardware Health Monitor has been successfully restored.

113

Advertising