Dell PowerVault DR2000v User Manual

Page 130

Advertising

For more information, see

replication --limit --speed <<num><kbps | mbps | gbps> | default> --target <ip address |

hostname>

replication --add --name <name> --role <source | target> --peer <ip address | hostname>

[--peer_name <name>] [--replication_traffic <ip address | hostname>] [--encryption <none

| aes128 | aes256>][--username <user name>]

Description

Adds a new replication link to a container on the DR Series system, for which you need to define its name, role, peer ID,
peer name, user name, and encryption level to apply. There are three options for encryption: none, aes128 (Advanced
Encryption Standard), using128-bit cryptographic keys, and aes256 (using 256-bit AES cryptographic keys).

NOTE: Make sure that the data container you intend to replicate already exists. If it does not, the following error
message displays:

Error: Container <container_name> does not exist

Syntax

replication --add --name backup --role source --peer 10.250.240.192 --

encryption aes128

Result

Enter password [email protected]:

Replication entry created successfully.

Replication Container : backup

Replication Role : Source

Replication Target : 10.250.240.192

Replication Target IP : 10.250.240.192

Replication Target Mgmt Name : 10.250.240.192

Replication Target Mgmt IP : 10.250.240.192

Replication Local Data Name : DR2K-01

Replication Local Data IP : 10.250.208.232

Replication Target Container : backup

Replication Enabled : Yes

Replication Compression Enabled: Yes

Replication Encryption : AES 128-bit

NOTE: To verify that you have successful added a replication link to the DR Series system (or to view the current
status of existing containers), see

replication --show