Dell PowerVault DR2000v - Manual (Page 54)

network --help
network <command> <command-arguments>
<command> can be one of:
--show Display network settings.
--delete Delete network interfaces(s).
--restart Restarts networking.
--setdhcp Configures bond interface to use DHCP.
--setstatic_ip Assigns a static IP address to the bond
interface.
--create_bond Create bond interfaces for the machine.
--create_eth Create eth interfaces for the machine.
--add_member Add an interface to an existing bond.
--setdns Configures the Domain Name Servers.
--setbonding Updates bonding mode or MTU information.
--update Updates bonding and individual interface
information.
--factory_reset Reset networking to factory configuration.
--host Manage local hosts.
--route Manage local routes.
--nslookup Looks up the IP address/hostname.
--traceroute Displays the packets route to network host.
--ping Sends ICMP ECHO_REQUEST to destination host.
--blink Blink LED on the specific ethernet device.
--enable Start the specific ethernet device(s) on
restart.
--disable Don't start the specific ethernet device(s)
on restart.
--troubleshoot Troubleshoots network issues.
--tcpdump Capture network traffic.
--iperf_client Run iperf (Network Performance) in client
mode.
--iperf_server Run iperf (Network Performance) in server
mode.
For command-specific help, please type network --help <command>
eg:
network --help show
OST
This topic introduces the set of OpenStorage Technology-related DR Series system CLI commands that enable you to
perform the following tasks:
• Display command-specific information
• Update the OST user password
• Delete the OST client
• Update the attributes of the OST client
• Limit the bandwidth consumed by OST
• List or clean up partial images
OST Command Usage
This topic introduces the ost command usage:
• ost --show [options]
• ost --update --opdup_encryption [options]
• ost --setpassword
54