Sony SX-N737 - Manual (Page 58)

SPECIFICATIONS
TUNER/AMPLIFIER RX-N737
<FM section>
Frequency range
Usable sensitivity (IHF)
Alternate channel selectivity
Signal-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<AM section>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
«Timer section and general>
Program timer
Sleep timer
87,5 MHz to 108 MHz '
1.3 pV (75 ohms) 13,2 dBf
50 dB (±400) kHz)
68 dB (STEREO), 72 dB (MONO)
0,3% (MONO), 1 kHz
0,8% (STEREO), 1 kHz
20 Hz to 15 kHz (+0,5 dB, -3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
530 (531 ) kHz to 1,710 ( 1,602) kHz
400 pV/m
23 dB (9 kHz)
53 dB (100 dB input)
Loop antenna
“Once" and/or “every" (independent setting)
Capable of setting in 10 minute increments,
99 minutes maxim um
«Amplifier section>
Power output
FTC RULE 50 watts per channel, Min. RMS at
6 ohms, from 65 Hz to 15 kHz, with no more than
1% Total Harmonic Distortion
Harmonic distortion 0.1% (25 W , 1 kHz, 6 ohms)
Input sensitivity (load impedance)
VIDEO 1 /DAT: 300 mV (47 kohms with volume)
VIDEO 2/AUX: 500 mV (47 kohms)
SUPER WOOFER 1.5 V
120 V AC, 60 Hz
125 W
260 X 198 X 330.5 mm (10',L x 77's x 13’/з in.)
6.0 kg (13.23 lbs.) '
Output terminal
Power requirements
Power consumption
Dimensions (W
x
H
x
D)
Weight
CASSETTE DECK/COMPACT DISC PLAYER FD-N939
«Cassette deck section>
Track format
4 tracks, 2 channels
Frequency response Metal tape: 20 - 17,000 Hz
Cr02 tape: 20- 16,000 Hz
Normal tape: 20 - 15,000 Hz
73 dB (Dolby C NR ON, metal tape peak level
above 5 kHz)
0.12% (WRMS) ± 0.19% (WPEAK)
'4.8 cm/seo. (1 V b ips)
9.5 cm/seo. (double speed)
AC bias
AC erase
DC servomotor x 1
Playback head x 1 (deck 1)
Record/playback/erase head x 1 (deck 2)
Signal-to-noise ration
Wow and flutter
Tape speed
Recording system
Erase system
Motor
Heads
«Compact disc player section>
Disc
Scanning method
Laser
Rotation speed
Error correction
D-A conversion ■
Signal-to-noise ratio
Harmonic distortion
Wow/flutter
Dimensions (W x H x D)
Weight
SPEAKER SX-N737
Cabinet type
Impedance
Music power
Speaker
Compact disc
Non-contact optical scanner (with semi-conductor
laser)
Semi-conductor laser { X = 780 nm)
Approx. 500 rpm - 200 rpm (CLV)
Cross Interleave, Reed Solomon code
1 -bit DAC
90 dB (1 kHz)
0.03% (1 kHz)
Unmeasurable
260 X 198 X 328 mm (10’/д x 7% x 13 in.)
4.5 kg (9.9 lbs.)
3-way, bass reflex (EIAJ magnetically shielded)
6 ohms
60 W
130 mm cone type woofer
60 mm cone type tweeter
20 mm ceramic type super tweeter
87 dB/W /m
215 X 396x240 mm ( 8 V 2 x 15=/sx9’/2 in.)
4.2 kg (9.2 lbs.)
120 VAC, 60 Hz
System total 140 W
Vertical placement
690 X 396 x 330.5 mm
(27V4X 15=/ bx 13'/ein.)
Horizontal placement
950 X 396 X 330.5 mm
(37'/2 X 15'7s X 13V b in.)
18.9 kg (41.6 lbs.)
FM feeder antenna (1)
AM loop antenna (1)
Remote control (1)
Operating instructions (1)
• Specifications and external appearance are subject to change without
notice due to product improvement.
• Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
• “DOLBY” and the double-D symbol □□ are trademarks of Dolby
Laboratories Licensing Corporation.
• The word “BBE” and the “BBE symbol" are trademarks of BBE Sound,
Inc.
• Under license from BBE Sound, Inc.
Note
Please check the laws on copyright related to recordings from discs, radio
or external tape for the country in which the machine is being used.
Output sound pressure level
Dimensions (W x H x D)
Weight
COMMON SECTION
Power requirements
Power consumption
Dimensions (W
x H x D)
Weight
Accessories
58