Power sources, Notes, Insert the dc coupier in the camera’s – Canon E 700 User Manual
Page 11: Connect the dc coupler to the adapter, Plug the adapter into a mains outlet, Detach the dc coupler after use, Connecting the camera to a mains outlet
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power Sources
Before operating your camera, you will need to use
the CA-100 Compact Power Adapter to:
provide power from a mains outiet
or
charge a battery pack
Notes;
• The CA-100 Compact Power Adapter converts
current from a household mains outlet (100-240
V AC, 50/60 Hz) to the 6 V DC current used by
your camera.
• If the adapter is used next to a TV, it may cause
the TV to emit noise — move the adapter away
from the TV or the aerial cable.
• See the CA-100 instruction manual for further
details.
a
ь
0)
Q.
О
о
w
to
Ш
Connecting the camera to a mains outlet
Use the CA-100 Compact Power Adapter and the
DC-100 DC Coupler to provide your camera with
instant power from a mains outlet.
1. Insert the DC coupier in the camera’s
power source compartment.
• Slide it in, then press it until it clicks and locks
into place.
2. Connect the DC coupler to the adapter.
3. Plug the adapter into a mains outlet.
• The green OPERATE indicator lights up.
4. Detach the DC coupler after use.
• Slide and hold the ВАТТ EJECT lever while
you pull the DC coupler outwards from the
front.
• Always turn the camera off before removing
the power source.