Editing to a vcr – Canon E 700 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing to a VCR
Play back and record the scenes you want.
Tape before editing
u
c
•o
0
)
o
c
(Q
>
■o
<
By connecting the camera to a VCR, you can edit
your recordings in order to remove unwanted
scenes — or combine different shots and create a
sophisticated video production.
Preparations
1. Connect the camera to the VCR.
• Follow the relevant “Playback Connection”
instructions on p. 16.
2. Turn the TV on.
• Be sure to set it to the video channel, or set
the TVA/IDEO selector to VIDEO.
3. Turn on the VCR and load a cassette.
• See your VCR instruction manual for details.
4. Select LINE IN on the VCR and put it in
record pause mode.
5. Turn on the camera and load your
recorded cassette.
To edit
1. Press the ■ STOP button to select
playback mode
2. Find a point on your recorded cassette
siightiy ahead of the section you want
to copy.
3. Start to play it back while you monitor
the picture on the TV.
4. Start recording on the VCR as soon as
the section you want to copy appears
on the screen.
5. Pause the VCR at the end of the section
you want to copy, then stop piayback
on the camera.
6. Repeat steps 2 to 5 until your edited
recording is compiete.
Note:
• The quality of the edited tape will be slightly lower
than that of the original.