Canon E 700 - Manual (Page 12)

Charging and attaching the battery pack
You will have to charge the battery pack before you
can use it. A brand new battery pack must be
charged twice before use.
Use the CA-100 Compact Power Adapter.
B P-E77K B attery P ack
I Charging time: 70 minutes
Continuous recording time: 50 minutes
These times vary — the safest policy is to
always have two or three times as many battery
I packs as you think you will need.
1. Insert the battery pack in the adapter as
shown.
• Make sure the DC coupler is not connected.
2. Plug the adapter into a mains outlet.
• The green OPERATE indicator lights up.
• The red CHARGE indicator flashes to show
that charging is in progress.
3. Wait until the battery pack is fully
charged.
• The CHARGE indicator glows steadily when
the battery pack is fully charged.
4. If the battery pack is brand new, remove
it from the adapter, then insert it again
and charge it one more time.
5. Remove the battery pack from the
adapter and attach it to the camera.
• Slide it in, then press it until it clicks and locks
into place.
6. Detach the battery pack after use.
• Slide and hold the ВАТТ EJECT lever while
you pull the battery pack outwards from the
front.
• Always turn the camera off before removing
the power source.
Ш 0)
tf>
o*
о
E
5‘
Э