Canon E 700 - Manual (Page 21)

If your TV does not have audio/video input terminals (Australia):
Use the optional RU-100 RF Unit to connect the camera to the television, then select the video channel:
o
'i?
(D
u
9L
o
O
(S
CD
Connecting the RF unit
coaxial cable with
DIN-connector^
aMB^ b amnn |3
male female
Selecting the video channel
HO
I I
1CH OCR
1. Connect the RF unit to the camera.
2. Connect the aerial cable to the FROM
ANT. terminal on the RF unit.
3. Connect the ‘female’ DIN-connector on
the coaxial cable to the TO TV terminal
on the RF unit.
4. Connect the ‘male’ connector to the
aerial input on the TV.
To watch a TV programme
Turn the camera off or disconnect it from the RF
unit when you want to watch a broadcast
programme. If you leave the camera connected
and turned on, the RF unit will automatically select
the camera signal instead of the broadcast signal.
The video channel is the channel (either 0 or 1)
which is not used by a broadcasting station in your
area and can be used for cassette playback.
1. Turn the TV on.
2. Start playback on the camera.
• See p. 15 for playback.
3. Set the TV and the selector on the RF
unit to the video channel.
• For example, if the video channel in your area
is channel 0, tune the TV to channel 0 and set
the selector to OCR (using a flat-edge
screwdriver).