Canon E 700 - Manual (Page 42)

Viewfinder Displays
To display the date and time on a connected TV,
press the DATE button. Press the AGE button to
see the age and the C.TITLE button to see the title.
These displays are recorded just as they appear on
the screen.
Press the wireless controller’s ON SCREEN button
to see the other viewfinder displays on the TV
screen. They will not be added to your recordings.
Indicates a flashing display.
Date and time (p. 22)
10:27 AM
IB.APR.1903
3Y.10M.
BON VOYAGE
PAUSE
REC
PLAY
STILL
FF
REW
EJECT
Age (p. 23)
Title (p. 24)
Record pause mode (p. 6)
Recording (p. 6)
Normal playback, fast forward
playback or rewind playback
(p. 15)
Still playback (p. 15)
Fast fonward (p. 15)
Rewind (p. 15)
The tape is stopped (in
playback mode) (p. 15).
The camera is ejecting the
tape (p. 13).
The safety mechanism is
activated (p. 38).
No cassette is loaded (p. 13).
T.ENO
BLC
SPOT
sss
I
M.FOCUS
I
I
t/1DGQD
The tape has reached the
end.
The battery pack is nearly
exhausted (p. 12).
Condensation is detected in
the camera (p. 37).
The lithium battery is almost
exhausted, or not inserted
properly (p. 11).
Program AE modes (p. 26)
SP
Tape counter
Manual focus (p. 30)
Edit-erase can be used
(p. 31).
Shutter speed (1/10,000th of
a second in this example)
(p. 29)
Tape speed (SP or LP) (p. 6)
1 ; 2 3 ; A 5
The tape counter indicates
roughly how long you have
recorded.
In this example, you have recorded for
approximately 1 hour, 23 minutes and 45 seconds
(in SP mode).
The tape counter also indicates the length of time
the tape has been running during search and
playback.
The tape counter is reset when a cassette is
loaded, or when you press the COUNTER RESET
button.
Recording reminder
0 SEC 10 SEC
The camera counts from 0 SEC to 10 SEC when
recording starts.
This is to help you make sure your scenes are not
too short, for easy viewing and editing. Try to
record at least the full 10 seconds.
>
Q.
O.
o
3
u
3
o
3
5’
3